layout: post title: Ubuntu架設corosync+pacemaker達成自訂服務切換 categories:
建置雙node Active/Passive HA叢集
ms1 10.130.51.51 ms2 10.142.51.52
安裝軟體
sudo apt-get install pacemaker
產生金鑰用
sudo apt-get install haveged
ms1產生金鑰
sudo corosync-keygen
把/etc/corosync/authkey複製同份到ms2，權限400 root:root
設定有點多，我參考C.2.1. Enabling Pacemaker For Corosync 2.x
如下，採用udp單播連線
totem {
version: 2
cluster_name: debian
token: 3000
token_retransmits_before_loss_const: 10
clear_node_high_bit: yes
secauth: off
crypto_cipher: none
crypto_hash: none
transport: udpu
interface {
ringnumber: 0
bindnetaddr: 10.130.51.51
broadcast: yes
mcastport: 5405
ttl: 1
}
}
logging {
fileline: off
to_stderr: no
to_logfile: no
to_syslog: yes
syslog_facility: daemon
debug: off
timestamp: on
logger_subsys {
subsys: QUORUM
debug: off
}
}
nodelist {
node {
ring0_addr: 10.130.51.51
nodeid: 1
}
node {
ring0_addr: 10.130.51.52
nodeid: 2
}
}
quorum {
provider: corosync_votequorum
two_node: 1
}
service {
name: pacemaker
ver: 1
}
/etc/default/corosync
START=yes
安裝好後corosync就被啟動了，要讓他重啟
service corosync restart
就能看到對方了
root@ms1:~# corosync-cmapctl | grep members
runtime.totem.pg.mrp.srp.members.1.config_version (u64) = 0
runtime.totem.pg.mrp.srp.members.1.ip (str) = r(0) ip(10.130.51.51)
runtime.totem.pg.mrp.srp.members.1.join_count (u32) = 1
runtime.totem.pg.mrp.srp.members.1.status (str) = joined
runtime.totem.pg.mrp.srp.members.2.config_version (u64) = 0
runtime.totem.pg.mrp.srp.members.2.ip (str) = r(0) ip(10.130.51.52)
runtime.totem.pg.mrp.srp.members.2.join_count (u32) = 1
runtime.totem.pg.mrp.srp.members.2.status (str) = joined
接著執行pacemaker相關設定
update-rc.d pacemaker defaults 20 01
service pacemaker start
就能在pacemaker看到node串起來
root@ms1:~# crm status
Stack: corosync
Current DC: ms1 (version 1.1.16-94ff4df) - partition with quorum
Last updated: Fri Jan 19 02:55:28 2018
Last change: Fri Jan 19 02:52:19 2018 by hacluster via crmd on ms1
2 nodes configured
0 resources configured
Online: [ ms1 ms2 ]
No resources
root@ms2:/etc/corosync# crm status
Stack: corosync
Current DC: ms1 (version 1.1.16-94ff4df) - partition with quorum
Last updated: Fri Jan 19 02:55:23 2018
Last change: Fri Jan 19 02:54:35 2018 by hacluster via crmd on ms1
2 nodes configured
0 resources configured
Online: [ ms1 ms2 ]
No resources
作2nodes特殊設定
root@ms2:/etc/corosync# crm configure property stonith-enabled=false
root@ms2:/etc/corosync# crm configure property no-quorum-policy=ignore
https://github.com/xnum/echo_service
sudo apt install libuv1-dev
make && sudo make install
設定資源
crm configure primitive ha-echod lsb:echod op monitor interval=10s
crm status
設定
root@ms1:~/echo# crm config show
node 1: ms1
node 2: ms2
primitive ha-echod lsb:echod \
op start interval=0s timeout=5s \
op stop interval=0s timeout=5s \
op monitor interval=10s on-fail=standby \
meta target-role=Started migration-threshold=3 failure-timeout=15s
property cib-bootstrap-options: \
have-watchdog=false \
dc-version=1.1.16-94ff4df \
cluster-infrastructure=corosync \
cluster-name=debian \
stonith-enabled=false \
no-quorum-policy=ignore \
last-lrm-refresh=1516341959
crm configure primitive VIP ocf:IPaddr2 params ip=10.130.51.1 nic=eth1 op monitor interval=10s
嘗試ping 10.130.51.1
把兩個資源綁定在一起
crm configure group ha-group VIP ha-echod
Stack: corosync
Current DC: ms1 (version 1.1.16-94ff4df) - partition with quorum
Last updated: Fri Jan 19 07:11:21 2018
Last change: Fri Jan 19 07:11:18 2018 by root via cibadmin on ms1
2 nodes configured
2 resources configured
Online: [ ms1 ms2 ]
Active resources:
Resource Group: ha-group
VIP (ocf::heartbeat:IPaddr2): Started ms2
ha-echod (lsb:echod): Started ms2
最後設定
ms1: ms
ms2: ms
primitive VIP IPaddr2 \
params ip=10.130.51.1 nic=eth1 \
op monitor interval=10s
primitive ha-echod lsb:echod \
op start interval=0s timeout=5s \
op stop interval=0s timeout=5s \
op monitor interval=10s on-fail=standby \
meta target-role=Started migration-threshold=3 failure-timeout=15s
group ha-group VIP ha-echod
property cib-bootstrap-options: \
have-watchdog=false \
dc-version=1.1.16-94ff4df \
cluster-infrastructure=corosync \
cluster-name=debian \
stonith-enabled=false \
no-quorum-policy=ignore
嘗試換node啟動
crm node standby ms2
http://linuxlasse.net/linux/howtos/Pacemaker_and_Corosync_HA_-_2_Node_setup